NEBOSH National General Certificate Syllabus
The NEBOSH National General Certificate provides a broad understanding of key health and safety issues, covering the legal requirements for health and safety in the UK and the identification and control of workplace hazards.
The course is split into 3 units which are assessed individually - 2 taught units and a work-based assignment.
If you're looking to study this course outside of the UK then we recommend taking a look at the NEBOSH International General Certificate course on our international courses website.
Upon completion of the course, learners will be able to:
- Assist in the planning, implementation and review of an organisations health & safety policy.
- Understand the requirements of HSE legislation, codes of practice and the prosecution process.
- Undertake risk assessments and recommend suitable action.
- Investigate accidents and prepare reports in line with HSE legislation.
- Identify common hazards in the workplace and recommend suitable corrective measures.
Full course syllabus
Unit NGC1: Management of Health and Safety
This unit provides the foundation of Health and Safety knowledge, covering HSE legislation and the key elements of an effective Health and Safety Management System.
Element 1: Foundations in Health and Safety
- 1.1 Scope and Nature of Occupational Health and Safety
- 1.2 Moral and Financial Drivers for Health and Safety Management
- 1.3 The Legal Framework For Health and Safety Regulation
- 1.4 Health and Safety at Work etc. Act 1974
- 1.5 The Management of Health and Safety at Work Regulations 1999
- 1.6 Client and Contractors
Element 2: Health and Safety Management Systems - Plan
- 2.1 Key Elements of a Health and Safety Management System
- 2.2 Purpose and Importance of Setting Policy for Health and Safety
- 2.3 Key Features and Appropriate Content of an Effective Health and Safety Policy
Element 3: Health and Safety Management Systems - Do
- 3.1 Roles and Responsibilities of Employers, Directors and Managers Health and Safety Culture
- 3.2 Human Factors That Influence Behaviour at Work
- 3.3 Improving Health and Safety Behaviour
- 3.4 Principles and Practice of Risk Assessment
- 3.5 General Principles of Control
- 3.6 Sources of Health and Safety Information
- 3.7 Safe Systems of Work (SSW)
- 3.8 Permits-To-Work (PTW)
- 3.9 Personal Protective Equipment
- 3.10 Safety Signs and Signals
- 3.11 Emergency Procedures and Arrangements
- 3.12 First Aid in the Workplace
Element 4: Health and Safety Management Systems - Check
- 4.1 Active and Reactive Monitoring
- 4.2 Investigating incidents
- 4.3 Recording and Reporting Incidents
Element 5: Health and Safety Management Systems - Act
- 5.1 Health and Safety Auditing
- 5.2 Reviewing of Health and Safety Performance
GC2: Controlling Workplace Hazards
GC2 covers a wide range of common hazards from various working environments and the appropriate control measures required to minimise risk.
Element 1: Workplace Hazards and Risk Control
- 1.1 Health, Welfare and Work Environment Requirements
- 1.2 Violence at Work
- 1.3 Substance Misuse
- 1.4 Safe Movement of People
- 1.5 Working at a Height
- 1.6 Excavations
- 1.7 Temporary Works
Element 2: Transport Hazards and Risk Control
- 2.1 Safe Movement of Vehicles
- 2.2 Driving at Work
Element 3: Musculoskeletal Hazards and Risk Control
- 3.1 Work-related Upper Limb Disorders
- 3.2 Display Screen Equipment
- 3.3 Manual Handling
- 3.4 Manually Operated Load Handling Equipment
- 3.5 Powered Load Handling Equipment
Element 4: Work Equipment Hazards and Risk Control
- 4.1 General Requirements For Work Equipment
- 4.2 Hand Tools
- 4.3 Machinery Hazards
- 4.4 Control Measures for Machinery Hazard
- 4.5 Specified Equipment
Element 5: Electrical Safety
- 5.1 Use of Electricity at Work - Hazards and Risks
- 5.2 Control measures When Working With Electrical Systems or Using Electrical Equipment in All Workplace Conditions
Element 6: Fire Safety
- 6.1 Fire Initiation, Classification and Spread
- 6.2 Fire Risk Assessment
- 6.3 Fire Prevention and Prevention of Fire Spread
- 6.4 Fire Alarm and Fire-Fighting Equipment
- 6.5 Evacuation of a Workplace
Element 7: Chemical and Biological Health Hazards and Risk Control
- 7.1 Forms of, Classification of, and Health Risks from Hazardous Substances
- 7.2 Assessment of Health Risks
- 7.3 Occupation Exposure Limits
- 7.4 Control Measures
- 7.5 Specific Agents
- 7.6 Safe Handling and Storage of Waste
Element 8: Physical and Psychological Health Hazards and Risk Control
- 8.1 Noise
- 8.2 Vibration
- 8.3 Radiation
- 8.4 Stress
GC3: Health and Safety Practical Application
The aim of this unit to assess your knowledge and understanding gained from Units NGC1 and GC2 in a practical environment by successfully completing two activities:
- A safety inspection of a workplace, identifying common hazards and suggesting appropriate and cost effective control measures
- A written report detailing your findings from the inspection and persuasively urging management to take appropriate action
All units are compulsory and assessments must be passed to gain the full qualification.
- Units NGC1 and GC2 are each assessed by a 2 hour exam consisting of 10 short essay answers and 1 long essay answer.
- GC3 is a practical assessment which must be completed within 14 days of sitting the NGC1 and GC2 exams.
Take a look at our NEBOSH General Certificate Exams and Pass Rates blog post to find out more about the exams.
Study methods for staff on the NEBOSH Certificate
Find the best study solution to suit your staff needs:
If you are an individual looking to take your NEBOSH Certificate, please visit our Public Classroom Course page.